Built to last and perform optimally under the most demanding touring conditions, the 4U, rack-mountable, rugged STG-2412 stagebox features 24 mic/line combo inputs with high-performance microphone preamps, 12 balanced line outputs, and a headphone amp with level control.
The STG-2412 connects easily to digital consoles and powerful DSP servers so you can mix, record, monitor, and soundcheck in real time—with the processing power of Waves’ world-class plugins.
24 XLR/TRS mic/line combo inputs and 12 XLR line outputs
Digital I/O: Word Clock, AES/EBU digital with XLRs, 5-pin MIDI DIN
High-performance mic preamps with remote digital control
Supports up to 96 kHz sample rates
Powerful headphone output with level control
Rugged, road-worthy 4U rack-mountable chassis
Per-input 48V phantom power, with power-on and clipping LEDs
etherCON SoundGrid network port for a secure connection
Universal power supply, 100 - 240 VAC
Designed to handle the rigors of the road, and deliver superb sound
Support
XLR Input
Input Gain: Adjustable from 0 dB to 60 dB in steps of 1dB
Frequency Response: +0/-0.2 dB, 16 Hz to 21 kHz @ 48 kHz sample rate (+4dBu input @ +20 dB gain) +0/-0.2 dB, 17 Hz to 40 kHz @ 96 kHz sample rate (+4dBu input @ +20 dB gain)
Dynamic Range: (Measured bandwidth limited 20 Hz to 20 kHz) 110 dB Gain = 0
EIN (Gain 60, 150 ohms) -128 dBu A weighted
THD+N (Measured at 1 kHz @ +4dBu, Gain = +20) 0.0023%
Phase Response: +/-10 Deg 20 Hz to 20 kHz
Input impedance : 2k ohms
48V phantom power available per input
TRS Input
Input Gain: Adjustable from 0 to 60 dB in steps of 1dB
Frequency Response: +0/-0.2 dB, 16 Hz to 21 kHz @ 48 kHz sample rate (+4dBu input @ +20 dB gain) +0/-0.2 dB, 17 Hz to 40 kHz @ 96 kHz sample rate (+4dBu input @ +20 dB gain)
Dynamic Range: (Measured bandwidth limited 20 Hz to 20 kHz) 110 dB Gain = 0
EIN (Gain 60, 150 ohms) -128 dBu A weighted
THD+N (Measured at 1 kHz @ +4dBu, Gain = +20) 0.0023%
Phase Response: +/-10 Deg 20 Hz to 20 kHz
Input impedance: 10k ohms
XLR Balanced Outputs
Selectable maximum output level: +18 dBu or + 24 dBu
Frequency Response: +0/-0.2 dB 16 Hz to 22 kHz @ 48 kHz sample rate +0/-0.2 dB 17 Hz to 40 kHz @ 96 kHz sample rate
Word clock input: Standard 5 Volt square wave. 50% duty cycle.
Word clock output: 1X sample rate Standard 5 Volt square wave. 50% duty cycle.
Word clock Input: 1X sample rates of 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz.
Headphone Output
1 watt per channel into 32 Ohm headphones.
Power
Universal input power supply 100V-240 VAC, 50/60 Hz, 1.0 Ampere.
Dimensions
19 x 7 x 10 inches (482 x 177 x 254 mm)
Weight
19.6 lb (8.9 kg)
Setups
In the below setups, on-stage instruments and microphones are connected to the STG2412 which is remotely controlled from the LV1 mixer at front-of-house. The audio is processed on a SoundGrid Server and then outputted to stage-monitors and/or the PA system. An optional DAW computer (with the SoundGrid Driver installed) can be added to the setup for recording the show, playing back audio and for virtual soundcheck.
<div class="msg-box text-left mb-12">You may find this content helpful: To be able to view it, <a href="/legal/cookie-policy" target="_top" title="">allow Performance Cookies here</a>.</div>